Directions for Use (Single Patient Use Only)

Important: Follow instructions that came with inhaler (MDI).

(1) Remove cap(s).

(2) Look for foreign objects.

(3) Insert inhaler (MDI) into back.

(4) Apply mask to face or put mouthpiece into mouth.

(5) Depress inhaler (MDI) at beginning of slow inhalation. If using mask, maintain good seal for 2-3 breaths after depressing inhaler.

(6) Slow down inhalation if you hear the FLOWSIGnal® Whistle sound.

(7) Wait 30 seconds before repeating steps 4-6 as prescribed.

Cleaning Instructions

Clean AeorChamber Plus™ VHC only as per instructions before first use, then weekly.

Remove back piece only. (Do not remove mask)

Soak both parts for 15 minutes in lukewarm water with liquid detergent. Agitate gently.

Rinse in clean water.

Shake out excess water. Do not rub dry.

Let air dry in vertical position.

Replace back piece when unit is completely dry and ready for use.

Notes

— VHC--Valved Holding Chamber

— Do not leave AeroChamber Plus™ VHC unattended with children. This is a medical device, not a toy.

— Do not disassemble the product at any time (even for cleaning, except for flexible back piece).

— This product contains no latex.

Cautions

— Product should be replaced if valves are damaged or missing.

— If unsure on how to use this product, talk to your physician or pharmacist.

— Administer one puff at a time.

— Rx Only

Indications for Use: The AeroChamber Plus™ Valved Holding Chamber (VHC) is intended to be used by patients who are under the care or treatment of a licensed health care professional or physician. The device is intended to be used by these patients to administer aerosolized medication from most pressurized Metered Dose Inhalers, prescribed by a physician or health care professional. The intended environments for use include the home, hospitals and clinics.

Distributed by:

Forest Pharmaceuticals, Inc.

Subsidiary of Forest Laboratories, Inc. St. Louis, MO 63045

Monaghan Medical Corporation, P.O. Box 2805, Plattsburgh, NY 12901

Patents 5,042,467; 5,645,049; 5,848,588; 5,988,160 and Patents Pending

Printed in USA RMC 5263 Revision: 02/01

AeroChamber Plus ™ and

ComfortSeal™ are registered trademarks used under license.

PRODUCT PHOTO(S):

NOTE: These photos can be used only for identification by shape, color, and imprint. They do not depict actual or relative size.

The product samples shown here have been supplied by the manufacturer and reproduced in full color by PDR as a quick-reference identification aid. While every effort has been made to assure accurate reproduction, please remember that any visual identification should be considered preliminary. In cases of poisoning or suspected overdosage, the drug' identity should be verified by chemical analysis.